Close

Fit it... Forget it...!

Ideal solutions for complete water supply system with zero maintenance for hot-n-cold water.

Oriplast Banner
Oriplast Banner
Camlock Pipes & Fittings
Camlock Pipes & Fittings
Camlock Pipes & Fittings
Camlock Pipes & Fittings
Camlock Pipes & Fittings
Camlock Pipes & Fittings
Camlock Pipes & Fittings
Camlock Pipes & Fittings
PRODUCT

Camlock Pipes & Fittings

Ori-Plast has vast experience in manufacturing uPVC pipes for multi-functional uses including plumbing, that led us to come out with another unique solution to an immediate commissioning of a pipeline post installation. The system is referred to as uPVC CAM-LOCK joints. The pipes that were developed with this joining system are as per ASTM D 1785 standard. Presently these pipes are available with regular Ori-Plast blue and white lead free materials.

Ori-Plast’s uPVC Cam-Lock pipes provide a restrained joint by utilizing precision machined grooves on both spigot and socket ends of a pipe. When the spigot end goes in to the socket end, the grooves align to allow a spline (a nylon rope) to be inserted through the annular hole resulting in a fully circumferential restrained joint that locks the pipes properly. There are two elastomeric sealing rings in the socket end of the pipe to provide hydraulic seal to the joint.

Camlock Pipes & Fittings
Camlock Pipes & Fittings

Product Range

PRODUCTS

Standard

ASTM Logo
PRODUCTS

Features & Benefits

Benefits

    • Ori-Plasts Cam-Lock uPVC pipes are fast, simple and reliable which do not require solvent cement & any other majortools.
    • The pipes can withstand very high pressure (refer to the dimensional chartatthe end).
    • The time of installation is comparatively lesser than other conventional systems.
    • The pipeline can be commissioned immediately after installation.
    • Thrust blocking arrangement is not required since there is allowance for accommodation of movement.
    • Alignmentwhile installation is better than other systems.
    • The joint can be easily disassembled allowing for system changes and re-use of entire system in another place.
PRODUCTS

Application

  • Supply lines to over head reservoir from pump set in highrise buildings.
  • Above the ground pressure lines.
  • Buried pressure lines.
  • Industrial piping.
  • Slurry disposal lines.